| User sets full spray (180-degree) or half spray (90-degree). Caps included with each nozzle. Screwdriver, two screws, 10- to 20-seconds to swap the caps and change the spray pattern.
These large-orifice Boomless Flat Spray Nozzle do not contain a pesky screen so it requires zero maintenance.
1/4" FNPT
Rugged, corrosion resistant all brass construction so this sprayer nozzle is pretty much indestructible.
Made in the USA
The Operating Data For 180-degree Nozzles shown in the listing is for a mounting height 36" above ground. The spray pattern ranges from 11- to 58-feet and a guy might figure he needs 10% overlap. Note: 0.43GPM & 11' swath is using the 90-degree cap on a #2 nozzle.
|
