|
Traction Bar System for the 94 - 00 Honda Integra; 92 - 00 Honda Civic; 93 - 97 Honda Del Sol (Si & SiR see * below)
Keep your wheels on the ground, put max power where the rubber meets the road.
Harder, straighter launch >>>> increased 60' times. This traction bar system pre-loads the suspension. Pre-loading the suspension corrects side-pull, reduces wheel-hop and tire-shake, and improves traction and handling. You get greater stability because the traction bar system strengthens the front end all while it controls drive-line loading so to reduce wear and breakage.
FULL DRAG, high-strength performance design is correct and effective while minimizing weight and maximizing durability.
FITS your car! (B, H, D & K engines)
STAND-OUT DESIGN FEATURES include:
Two-bolt lower control arm mounting pad. That positions the radius arm just right on the lower control arm. Single-bolt mounting pads throw you off to the side and out-of-whack.
Fits slammed cars. The bar and arms are up and clear.
High-strength billet radius arms
Properly, uniquely designed traction bar mounting plate where the bar mounts to the tow-hook positions. Tapered, angled plate shortens the bar all of which reduces weight (13-lb 10-oz Total System Weight). The angled plate provides for a larger, stronger weld and and a sleek, good look, too.
Extra heft & large welds provide max strength.
Fewest possible holes in the high-strength traction bar mounting plates.
*MADE IN USA*
Pick your color! Custom finished traction bars, just let me know what you want. Most any color available and I'll even match your car if you provide model, year and paint code. Hardened clear coats to top it off. Don't plow any road gravel and the finish will last a good long time. Touch up is the same as the other painted surfaces on your car.
 
Hardened steel rod ends
1" 6061-T6 billet radius arms
Full 3/16" bar wall thickness
1/4" mounting plate thickness
Grade 8 mounting hardware is included
*Si & SiR models require welds. The Si & SiR do not have OEM bolts on the lower control arm for bolting up the radius arm mounting pads. Let me know and I will ship unpainted mounting pads suitable for welding.
Swap notes; Fits;
B-series DOHC swap
H22 & K20 swap
COMPARING PRICES? BE SURE TO INCLUDE SHIPPING CHARGES in your figuring.
GOOD & REASONABLE SHIPPING CHARGES ON MY ITEMS!
FAST, TOO.
|
